Welcome to Surya Colours - We Speak Colours
Products
Tufit- Wet Mineral Plaster
Tufit-Crack Filler
Tufit-Deluxe Putty
Distempers and Emulsions
Tufit- Dry Cement Plaster
Tufit Metallic Paint
Protac Cement Primer
Tufit Water Proofing Slurry
Tufit Tilefix
Tufit Textures
Tufit Uniform
Request A Quote
Home > Products > Tufit Textures
Tufit Textures

TUFIT textures are easy to apply, ideal for hiding imperfections and is reinforced with inter woven fibers for added durability. Can be applied over new and previously painted interior and exterior surfaces.

Uses

Interior ceilings in areas such as living rooms, dining rooms, bed rooms, kitchens and exteriors. Excellent adhesion over new and properly prepared surfaces such as drywall, plaster, masonry, acoustic ceiling tiles and wood.

Surface Preparation

Remove wallpaper and loose peeling paint. Wash off all dirt, grease, soap and oil build-up with mild detergent; mildew with one part of bleach and three parts of water. Rinse thoroughly and allow to dry.

Patch large holes and cracks with TUFIT Uniform (Texture paint will fill small imperfections)

Allow patched areas to dry, sand smooth and prime with PROTAC exterior primer. For chalking surface use protective coat.

Packing Available in 20 kg and 25 kg packing
Shelf life 6 months for acrylic texture, and 12 months for dry texture from the date of manufacturing
Scratch Base

Scratch base is cement based powder product which is grooved finish reinforced by quartz aggregate, formulated to withstand humidity and hot climatic conditions. It can be over coated with Surya Emulsion. It contains antifungal and antibacterial additives. Coverage: 80 -100 sft /25 kg.

Scratch Natural

Scratch natural product is based on natural powders and grooved finish, acrylic emulsion based and specially formulated to withstand all climatic conditions. Contains antifungal and antibacterial additives. Coverage: 80 -100 sft /25 kg.

Stone Finish

Stone finish is pigmented with quartz grains wall coating. It contains inorganic and special pigments. It is ideal for both internal and external surfaces. Coverage: 60 - 80 sft /25 kg.

Spray Finish (Natural and Pigmented)

It gives quality wall coating with an attractive drop effect and covers imperfections such as minor cracks and uneven patches. Spray finish is in two forms, Bubble and Compact in single and double shades.

Roller Finish

Roller finish is a product with quartz and fine powders, inorganic pigments, can be applied with roller to get desired finish. Coverage: 75-100 sft/ 25 kg.

Grit Finish

Grit finish contains pure acrylic emulsion with natural chips. Grit finish is thick and pleasant look. Coverage: 90-100 sft/ 25 kg.

Sandy Finish

Sandy finish is made with round sand, inorganic pigments. Coverage 100-120 sft / 25 kg.

General Technical Data
Colour As per Shade card
Finish Matt
Volume Solids 71 +/- 2%
Specific Gravity (Kg / Lit) 1.90 +/- 0.05
Theoretical Spreading Rate 2.5 - 5 sft / Kg
Recommended (DFT - Microns) 2000 2500
Recommended (WFT - Microns) 2500 3200
Drying Time
  • 30C temperature
  • Touch dry: 3-4 hrs
  • Hard dry: below 24 hrs